Hydraulic motor considerations

1, filter: normal filtration accuracy for industrial use recommended for 23 microns, low voltage, low speed or gap condition can allow precision to 75 microns.

2, viscosity: viscosity should be in good condition for best performance obtained from the motor in most conditions, viscosity at 15-1000, within the scope to ensure satisfactory work

3, hydraulic motors can be installed anywhere, install the motor bracket must be rigid enough, connected to the hydraulic motor installation shall ensure that the transmission shaft with hydraulic motor's output shaft axis.

4, the highest level of the discharge tubing should be higher than the top of the motor housing location, in case the motor casing oil emptying.